This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Enter the code NEWCUSTOMER at checkout for a special discount :)

How to Test the Effectiveness of a Grounding Blanket?

How to Test the Effectiveness of a Grounding Blanket?

Are you wondering if your grounding blanket is genuinely effective? Many users invest in grounding blankets, hoping to tap into the Earth’s natural energy for various health benefits, such as better sleep and reduced pain.

But how can you ensure your grounding blanket is working as intended?

Grounding blankets, made of organic cotton and conductive materials like silver fibers, are designed to improve wellness by connecting you with the Earth’s energy through direct contact with the earth’s surface. Numerous reviews highlight their potential to relieve chronic inflammation and enhance overall well-being.

In this blog post, we will guide you through simple steps to test the effectiveness of your grounding blanket using tools like a multimeter. We’ll also share signs that indicate whether your blanket is working correctly.

Stay with us to ensure you get the most out of your earthing experience!

Key Takeaways 

  • Regular checks ensure the grounding blanket continues to offer health benefits like better sleep and reduced inflammation through effective skin contact.

  • When using the blanket, look for significant voltage drops compared to baseline values without it.

  • Conduct periodic inspections of plugs, cords, and connections for wear or damage that might affect performance.

Why Test the Effectiveness of a Grounding Blanket?

Testing the effectiveness of an earthing blanket ensures it delivers its health benefits, such as reducing inflammation and promoting deep sleep. A non-functional grounding blanket may not effectively balance the body’s electrical energy, leading to continued pain, stress, and fatigue.

By verifying the performance of your earthing product, you can ensure that you are genuinely reaping the advantages associated with the flow of earth’s electrons into your body.

Grounding blankets have shown significant impacts in alleviating chronic inflammation, contributing to various health issues. The Earth's electrons enter the body, acting as natural antioxidants and influencing the immune response by reducing pain and inflammation. Regularly testing your grounded blanket helps maintain these positive effects on overall well-being.

This proactive approach guarantees that your investment works correctly for long-term health improvements.

Regular testing safeguards against ineffective use and maximizes health benefits.

How to Use a Multimeter to Test a Grounding Blanket?

Using a multimeter to test  grounding blankets ensures it functions correctly. Follow these steps to check your earthing blanket.

  1. Gather Equipment: Collect a multimeter, the grounding blanket, and a ground checker.

  2. Set Up the Multimeter: Adjust the multimeter to measure voltage (V). Aim for a setting that can read millivolts (mV).

  3. Prepare the Blanket: Spread out the grounding blanket on a flat surface. Ensure it’s plugged into an outlet using the coil cord and adapter provided.

  4. Test Grounding Source: Use the ground checker to confirm your outlet’s grounding hole works appropriately.

  5. Establish Baseline Reading: To get your baseline reading, turn on the multimeter and touch one probe to a grounded object, such as a metal water pipe.

  6. Measure Voltage on Blanket: Touch one probe of the multimeter to the conductive silver threads of the blanket while keeping contact with the ground via another method.

  7. Compare Readings: Compare this measurement with your baseline reading to determine if there is proper grounding energy flow.

  8. Interpret Results: A significant voltage drop indicates an effective grounding blanket.

  9. Care Instructions: To maintain the conductivity of your grounding blanket, wash it in warm water. This helps prevent the stripping of sweat and natural skin oils from the silver threads.

This simple procedure helps ensure you get all intended grounding blanket benefits effectively.

What Are Common Signs of an Effective Grounding Blanket for Wound Healing?

An effective grounding blanket benefits significantly reduces inflammation, enhances overall energy, and promotes wound healing. Users often report more profound, more restful sleep and a noticeable alleviation of pain, stress, and fatigue. Similar to walking barefoot on the Earth, using a grounding blanket can help reduce inflammation and promote wound healing.

The blanket contains 90% certified organic cotton and 10% conductive pure silver fiber thread for optimal conductivity.

The high-quality materials include a luxurious 400-thread count, ensuring comfort and functionality, and grounding blankets work by tapping into the Earth’s healing energy to balance the body’s electrical system.

A reliable product offers a 30-day return policy and a one-year manufacturer warranty to ensure its quality.

How to Compare Baseline and Grounded Measurements?

To compare baseline and grounded measurements, start by using a multimeter. Set the device to measure voltage. First, check the baseline measurement by placing the probes on your skin while ungrounded.

Record this value as your reference point.

Next, test with the best grounding blanket in use. Place one probe on the grounding outlet of the blanket and the other investigation again on your skin. Similar to walking barefoot, using a grounding blanket ensures direct contact with the Earth's energy. Compare this new reading with your initial baseline value.

A significant drop indicates that the best grounding blanket effectively reduces electrical voltage from your body.

Accurate testing can mean better health outcomes.

Why Regular Testing of a Grounding Blanket Is Important for Health Benefits?

Regular testing ensures that the grounded blanket delivers its intended health benefits. Over time, wear and tear can compromise its effectiveness. Routine checks confirm the grounding material, made of 95% premium organic cotton and 5% silver, remains intact and functional.

This vigilance helps maintain a connection to Mother Earth’s healing energy.

Testing also verifies that the blanket continues to effectively reduce inflammation and promote restful sleep. Without regular assessments, inconsistent use or environmental factors might affect performance.

Testing routinely guarantees you reap all potential health benefits from your grounding blanket.

How to Interpret Voltage Readings for Grounding Blankets?

How to Interpret Voltage Readings for Grounding Blankets?

Testing the effectiveness of your grounding blanket ensures that you reap its benefits, such as improved sleep and reduced aches. To interpret voltage readings, use a multimeter set to measure A.C. volts.

Place one probe on the grounding sheet and hold the other in your hand. Ideally, you should see a voltage drop when touching the grounded throw blanket compared to baseline readings without it.

A significant voltage reduction indicates a properly functioning grounding throw blanket. For instance, if your baseline reading is 4 volts but drops below 1 volt when using the blanket, this signifies adequate grounding.

Always perform these tests while in contact with both probes for accurate results. Regular checks should be conducted to maintain optimal performance and ensure continuous health benefits like quicker recovery from exercise and reduced snoring.

What Are the Steps to Perform a Grounding Test at Home?

Interpreting voltage readings helps you understand the efficiency of your earthing blanket. Testing a grounding blanket at home involves a straightforward procedure. Follow these steps to perform the test:

Gather Necessary Tools

Acquire a multimeter, ground checker, coil cord, and adapter suited for your location.

Set Up the Multimeter

Switch on the multimeter and set it to measure voltage (V) in alternating current (A.C.).

Prepare the Grounding Blanket

Plug the grounding blanket into a grounded outlet using the specialized cord.

Connect Multimeter Probes

Insert one probe into the outlet’s grounding hole and place the other probe on an ungrounded surface, such as a wooden table or chair.

Take Baseline Measurement

Record the initial voltage reading without touching or connecting yourself to the grounding blanket. This serves as your baseline value.

Conduct Personal Voltage Reading

Hold one probe in your hand while keeping in contact with an ungrounded surface, and note this second reading.

Activate Grounding Blanket

Sit or lie on your grounding blanket while holding one multimeter probe and ensure good skin-to-blanket contact.

Measure Grounded Voltage

Take another voltage reading under similar conditions but with contact on the grounded surface provided by the blanket.

Compare Results

Contrast these readings with your baseline measurement to see if a significant drop indicates adequate grounding.

Inspect Connections Regularly

To maintain accurate performance, periodically check all connections, including plugs and cords, for wear or damage.

Follow Care Instructions

Avoid using fabric softeners when washing your grounding blanket. Fabric softeners can strip sweat and natural skin oils from the silver threads, which helps maintain the blanket's conductivity.

This process ensures that your grounding blanket functions correctly by verifying its connection to Earth’s energy through measurable differences in electrical potential.

How to Troubleshoot a Non-Functional Grounding Blanket?

Troubleshooting a non-functional grounding blankets involves several steps. Follow this detailed guide to identify and fix the issue.

  1. Check All Connections: Ensure the coil cord is securely connected to the blanket and the grounding plug adapter.

  2. Test with Ground Checker: Use the ground checker provided with your blanket to verify if the outlet is properly grounded.

  3. Inspect for Damages: Check the blanket, cord, and adapter for any visible signs of wear or damage.

  4. Multimeter Test: Use a multimeter to measure electrical continuity between the connector at the end of your coil cord and various points on the surface of your blanket.

  5. Verify Wall Outlet: Confirm your wall outlet functions correctly by plugging it into another device.

  6. Reset Adapter: Some adapters come with reset buttons; press them to see if resetting helps restore functionality.

  7. Examine Cord Connections: Gently pull on each connection point of the coil cord to ensure they are not loose or disconnected internally.

  8. Check Socket Polarity: Make sure that your grounding socket has the correct polarity, which might otherwise hinder proper grounding.

  9. Read Voltage Readings: Interpret voltage readings taken from your body using a multimeter before and after connecting to determine whether the blanket has an effect.

  10. Care Instructions: Avoid using detergents with oils like lavender or coconut oil when washing the Earthing® Throw, as these can affect the conductivity of the grounding blanket.

Steps like these can help you identify why your grounding blanket is not working properly and guide you toward finding an effective solution.


Testing the effectiveness of best grounding blanket ensures you get the most out of its health benefits. Using a multimeter can help identify if your blanket is working correctly. Effective grounding blankets should show significant voltage reduction when tested.

Regular testing can alert you to issues early on, ensuring consistent performance. Comparing baseline and grounded measurements provides crucial insights into the blanket's impact.

Simple steps at home make this process straightforward and manageable for anyone interested in grounding therapy benefits. 


Congratulations! Your order qualifies for free shipping You are $0 away from free shipping.
No more products available for purchase